# Autogenerated configuration file template
#################################
# allow-axfr-ips	Allow zonetransfers only to these subnets
#
# allow-axfr-ips=0.0.0.0/0,::/0

#################################
# allow-recursion	List of subnets that are allowed to recurse
#
# allow-recursion=0.0.0.0/0

#################################
# allow-recursion-override	Set this so that local data fully overrides the recursor
#
# allow-recursion-override=no

#################################
# cache-ttl	Seconds to store packets in the PacketCache
#
# cache-ttl=20

#################################
# chroot	If set, chroot to this directory for more security
#
# chroot=

#################################
# config-dir	Location of configuration directory (pdns.conf)
#
# config-dir=/usr/local/etc

#################################
# config-name	Name of this virtual configuration - will rename the binary image
#
# config-name=

#################################
# control-console	Debugging switch - don't use
#
# control-console=no

#################################
# daemon	Operate as a daemon
#
# daemon=no

#################################
# default-soa-name	name to insert in the SOA record if none set in the backend
#
# default-soa-name=a.misconfigured.powerdns.server

#################################
# default-ttl	Seconds a result is valid if not set otherwise
#
# default-ttl=3600

#################################
# disable-axfr	Disable zonetransfers but do allow TCP queries
#
# disable-axfr=no

#################################
# disable-tcp	Do not listen to TCP queries
#
# disable-tcp=no

#################################
# distributor-threads	Default number of Distributor (backend) threads to start
#
# distributor-threads=3

#################################
# do-ipv6-additional-processing	Do AAAA additional processing
#
# do-ipv6-additional-processing=no

#################################
# edns-subnet-option-number	EDNS option number to use
#
# edns-subnet-option-number=20730

#################################
# edns-subnet-processing	If we should act on EDNS Subnet options
#
# edns-subnet-processing=no

#################################
# entropy-source	If set, read entropy from this file
#
# entropy-source=/dev/urandom

#################################
# fancy-records	Process URL and MBOXFW records
#
# fancy-records=no

#################################
# guardian	Run within a guardian process
#
# guardian=no

#################################
# launch	Which backends to launch and order to query them in
#
# launch=

#################################
# lazy-recursion	Only recurse if question cannot be answered locally
#
# lazy-recursion=yes

#################################
# load-modules	Load this module - supply absolute or relative path
#
# load-modules=

#################################
# local-address	Local IP addresses to which we bind
#
# local-address=0.0.0.0

#################################
# local-ipv6	Local IP address to which we bind
#
# local-ipv6=

#################################
# local-port	The port on which we listen
#
# local-port=53

#################################
# log-dns-details	If PDNS should log DNS non-erroneous details
#
# log-dns-details=

#################################
# log-dns-queries	If PDNS should log all incoming DNS queries
#
# log-dns-queries=no

#################################
# log-failed-updates	If PDNS should log failed update requests
#
# log-failed-updates=

#################################
# logfile	Logfile to use (Windows only)
#
# logfile=pdns.log

#################################
# logging-facility	Log under a specific facility
#
# logging-facility=

#################################
# loglevel	Amount of logging. Higher is more. Do not set below 3
#
# loglevel=4

#################################
# master	Act as a master
#
# master=no

#################################
# max-cache-entries	Maximum number of cache entries
#
# max-cache-entries=1000000

#################################
# max-queue-length	Maximum queuelength before considering situation lost
#
# max-queue-length=5000

#################################
# max-tcp-connections	Maximum number of TCP connections
#
# max-tcp-connections=10

#################################
# module-dir	Default directory for modules
#
# module-dir=/usr/local/lib

#################################
# negquery-cache-ttl	Seconds to store negative query results in the QueryCache
#
# negquery-cache-ttl=60

#################################
# no-shuffle	Set this to prevent random shuffling of answers - for regression testing
#
# no-shuffle=off

#################################
# out-of-zone-additional-processing	Do out of zone additional processing
#
# out-of-zone-additional-processing=yes

#################################
# overload-queue-length	Maximum queuelength moving to packetcache only
#
# overload-queue-length=0

#################################
# pipebackend-abi-version	Version of the pipe backend ABI
#
# pipebackend-abi-version=1

#################################
# query-cache-ttl	Seconds to store query results in the QueryCache
#
# query-cache-ttl=20

#################################
# query-local-address	Source IP address for sending queries
#
# query-local-address=0.0.0.0

#################################
# query-local-address6	Source IPv6 address for sending queries
#
# query-local-address6=::

#################################
# query-logging	Hint backends that queries should be logged
#
# query-logging=no

#################################
# queue-limit	Maximum number of milliseconds to queue a query
#
# queue-limit=1500

#################################
# receiver-threads	Default number of Distributor (backend) threads to start
#
# receiver-threads=1

#################################
# recursive-cache-ttl	Seconds to store packets for recursive queries in the PacketCache
#
# recursive-cache-ttl=10

#################################
# recursor	If recursion is desired, IP address of a recursing nameserver
#
# recursor=no

#################################
# retrieval-threads	Number of AXFR-retrieval threads for slave operation
#
# retrieval-threads=2

#################################
# send-root-referral	Send out old-fashioned root-referral instead of ServFail in case of no authority
#
# send-root-referral=no

#################################
# server-id	Returned when queried for 'server.id' TXT or NSID, defaults to hostname
#
# server-id=

#################################
# setgid	If set, change group id to this gid for more security
#
# setgid=

#################################
# setuid	If set, change user id to this uid for more security
#
# setuid=

#################################
# signing-threads	Default number of signer threads to start
#
# signing-threads=3

#################################
# slave	Act as a slave
#
# slave=no

#################################
# slave-cycle-interval	Reschedule failed SOA serial checks once every .. seconds
#
# slave-cycle-interval=60

#################################
# slave-renotify	If we should send out notifications for slaved updates
#
# slave-renotify=no

#################################
# smtpredirector	Our smtpredir MX host
#
# smtpredirector=a.misconfigured.powerdns.smtp.server

#################################
# soa-expire-default	Default SOA expire
#
# soa-expire-default=604800

#################################
# soa-minimum-ttl	Default SOA minimum ttl
#
# soa-minimum-ttl=3600

#################################
# soa-refresh-default	Default SOA refresh
#
# soa-refresh-default=10800

#################################
# soa-retry-default	Default SOA retry
#
# soa-retry-default=3600

#################################
# soa-serial-offset	Make sure that no SOA serial is less than this number
#
# soa-serial-offset=0

#################################
# socket-dir	Where the controlsocket will live
#
# socket-dir=/var/run

#################################
# strict-rfc-axfrs	Perform strictly rfc compliant axfrs (very slow)
#
# strict-rfc-axfrs=no

#################################
# tcp-control-address	If set, PowerDNS can be controlled over TCP on this address
#
# tcp-control-address=

#################################
# tcp-control-port	If set, PowerDNS can be controlled over TCP on this address
#
# tcp-control-port=53000

#################################
# tcp-control-range	If set, remote control of PowerDNS is possible over these networks only
#
# tcp-control-range=127.0.0.0/8, 10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12, ::1/128, fe80::/10

#################################
# tcp-control-secret	If set, PowerDNS can be controlled over TCP after passing this secret
#
# tcp-control-secret=

#################################
# trusted-notification-proxy	IP address of incoming notification proxy
#
# trusted-notification-proxy=

#################################
# urlredirector	Where we send hosts to that need to be url redirected
#
# urlredirector=127.0.0.1

#################################
# use-logfile	Use a log file (Windows only)
#
# use-logfile=no

#################################
# version-string	PowerDNS version in packets - full, anonymous, powerdns or custom
#
# version-string=full

#################################
# webserver	Start a webserver for monitoring
#
# webserver=no

#################################
# webserver-address	IP Address of webserver to listen on
#
# webserver-address=127.0.0.1

#################################
# webserver-password	Password required for accessing the webserver
#
# webserver-password=

#################################
# webserver-port	Port of webserver to listen on
#
# webserver-port=8081

#################################
# webserver-print-arguments	If the webserver should print arguments
#
# webserver-print-arguments=no

#################################
# wildcard-url	Process URL and MBOXFW records
#
# wildcard-url=no